Assembly and operation
{1}Assembly
1.Insert the TF card into TF card slot.
2.Installed and Fixed the spring clip,ensure the rear view was fixed, and safe driving position.
3.Turn off the engine, adjust the camera position, to obtain the best shooting range
4.Check the machine is installed correctly, turn on the engine, link up machine and the cigarette lighter by vehicle charger.
note/remark
（1）Please installed rear view recorder in right place with light and safety
（2）After correctly installation,LED of system will turn into BLUE color and display
（3）Please start the engine, and then plug in car charger.
{2}function
(A)．Record
Connecting the cigarette lighter after the installation completed, turn on the car engine, the recorder will automatically turn on and turn on the automatic recording function, {if cigarette no boot ,
please long press button (2)}.
Prior to the first video,the clients must set up video parameter, and the operation is as follows:
（1）、At video standby mode, short press the key (4) 1 times to enter the the resolution select items, press OK (7) to capture resolution, short press mode button (3) to exit.
（2）、At video standby mode, short press the Menu key (4) 2 times to enter the set video length 1/2/5 minutes, press OK button (7) to select, after finished,
press the mode button (3) to exit.
（3）、Turn off car engine, in 6 seconds, recorder and archiving will be sved and closed.
at standby mode, short press the menu button (4) 3 times,will enter into the front/back lens switching (front camera / back camera / dual camera mode),press up/down key (6)
and press OK key (7) to confirm.
Note:front/back lens switching also can be press shortcut keys, press up key (5) select:front camera A/ back camera B/ dual camera model AB.please note,
when using back camera mode,make sure that camera have been connected to hole (14)
(B)．photograph function
In the standby state, short press the button (3) into the camera mode, press the OK key(7) once to take a picture, now you can setup picture size, short press botton (4)
into the resolution 1M/2M/3M,press botton (6) to select picture size, press OK key (7) to confirm.
(C).Playback or captured.
1.In video mode, short press (3) 2 times into the playback mode, after short press OK key (7) ,you can playback video.
2.Delete file:select file, press key (4) once and then press OK key (7) to confirm the deletion files.
(D)．Motion detect function
1.At standby mode, short press menu key 4 times to enter the settings, press up key (6) into the Motion detect function,and click Open.
2.Motion detect function: at the standby state; SENSOR will start recored when detect the object moved. during recording, sensor will stop
if no objects moved in 10 seconds; if you want to exit,please short press menu button 4 times to enter the setting, then press key (6) into the motion detect function,and select close.
(E).Night vision function
1.When recorder starts, by default, the night vision function was automatically on, inside of the Infrared lamp,these is a photosensitive resistance,
it control the recording function base on brightness and darkness of the light.the sensors of infrared lamp will closed when detect brightness of the light,
it will enter the night vision mode automatically when detect darkness of the light.
2.Manual night vision function: when the recorder starts, short press bottom (2) to switch to night vision mode during the daytime,
night vision mode will detect the surrounding environment was dark and automatically open the dark night lamp, improve the video effectiveness.
（F).Broadcast Voice function
1.At Standby mode, press key (4) 4 times and into settings, press up key (6) into the voice selection,Factory settings is voice playback, multiple languages support,
at standby mode → settings→ tone, select open / close,press button (7) to confirm.
(G).Multiple Languages
This product in multiple languages, Simplified Chinese / traditional Chinese / English / Russian / Japanese / Korean / (Broadcast Voice enrolled)
Default language is English
At standby mode, press the menu button (4) 4 times into the language setting and select language.
(H).Collision sensor function
After the video recorder start, and during record, in case of serious vehicle collision, the machine will automatically start collision sensor and the accident of a significant video files saved
(this file will not be overwritten and deleted).Settings → G-sensor → 2G/4G/6G/8G (2G is the most sensitive)
(I)..Reverse rear view function
1Please make sure the reversing lens have connected to the AVIN, please hide wire inside the car, the camera mounted in a fixed position on the car rear glass, adjust the right angle.Confirm installation completed.Start machine and press keys (5) switch to rear lens B,adjust the right angle.
2during the car is start, hanging reverse gear, this machine screen will display the real-time status behind the car, fully help to complete the car reversing
(J).update time and date
Before using this machine,date and time must be updated, in order to improve the effect, improve the traffic safety, carry out investigation and obtain evidence.at standby mode,
settings →date.press up / down keys (5/6) to modify date , the next option press bottom (3) continue to be modified, after complete press OK key (7) to save and exit.
(K).Loop video and rewritten video
machine will automatically start the video when insert the charger or car charger , support loop recording and rewritten the recording, file interval of 200mS-400mS.
(L)．External camera
when using external camera, directly connect the camera line 3.5mm, plug into the interface , a white logo will display on machine screen
(M)．Removable U disk
Machine was shutdown, make sure connect the machine to the computer by USB cable, machine screen will display the selection (disk, camera, charging).click [REC/MIC] and select (disk) ,
short press [emergency lock] ,to entry the emergency lock: U disk connection mode, then LCD will display the U disk icon.Read file from the removable disk , pull out the USB cable after complete, machine will be power off automatically.
(N)．Ret camera
In the machine shutdown state, connect the machine to the computer via a USB cable. recorder will display the selection you want,the function mode is "USB storage, network cameras,
charging normal operation".please following to the needs to choice.
Note
Please set machine video resolution to VGA before operation.
（2）When you have to read video files by computer, we suggested using "card reader" TF video files are copied to the computer.
（3）Camera are non-drive, without any additional search for driver
(O).Low level power detection
When the machine was detected in low level power, LCD will prompt display the low level battery symbol, machines will be closed after save image in 15 mins(please charge battery ASAP).
Bottom features
1.Power on,off / Fill light switch key features: ① power on / off features ②Fill light switch
①Power on / off function: long press power on for 3 seconds,machine will start, this moment,the working indicator light (blue), LCD screen will display at the video state this moment;
REC indicator light (blue) will blinking all the time, video is on going; and long press power key for 3 seconds, machine will power off,also stop recording and save the video file automatic, work indicator light (blue) and REC (blue) soon went out.
②Fill light switch: start the machine, light touch and short press [Fill light switch] ,will be switch between Fill light switch on / off / mode,
when at automatic mode, photosensitive resistance of fill light switch will be control by light brightness and darkness.
Reset key
When the machine halts, it will be forced disconnect to the power and restart by prees RESET key in any mode status .
3.up key: ①up scroll ②switch SENSOR to Reverse shot
①Function: in menu state, touch press key (5), to scroll up to browse video clips;
②switch SENSOR to Reverse shot:In the standby state or video stats, short press the up keys, if want to camera the car inside, just switched to "Reverse shot" function.
4. Menu key function:①camera menu setting ②video menu setting ③playback menu setting
①Camera menu settings: in camera mode, short touch menu key to enter the photo menu settings, then short touch mode key (3) once ，will exit the photo menu mode，
return to the camera mode
②Video menu settings: in video mode, short touch menu key into the video menu settings, then a short touch button (3) to exit the video menu mode，return to video mode.
③Playback menu settings: in a playback mode, short touch menu key into the playback menu settings, then a short press button (3) to exit playback menu ，return to playback mode.
5. OK key:①one key photographing ② play/pause
①One key photographing function: start the machine, at video states; short press mode key to switch to camera mode, then a short press OK key (7),
to take a picture.then will back to photo standby state.
②play/pause key:at playback mode，short touch key 7 to play video file or pause。
Performance parameter:
camera sensor99141
front lens angle120°（± 20°）A+